π
2002-07-21 00:00
by Merlin
in Cars, Ncars
![[picture]](/blogimg/801_Drive.jpg)
π
2002-07-16 00:00
in Computers, Linux
After moving in a house, I made the linen closet a wiring closet, CAT-5e to all the rooms, and thanks to a job at VA Linux, I was able to get a fair amouunt of leftover free hardware, including:
a nice network swith (100Mbit/s, the good stuff, haha)
2 7-drive SCSI SCA disk shelves, plus a 3rd disk shelf, and I remember having 26 SCSI drives on a single machine, for a monster total filesystem of 2GB, yes 2TB!!!
Also got an old DAT3 tape autoloader with tape bar code reader. This one took a long time to get working, but in the end, I was able to backup the 2TB on a bunch of tapes, that was no small feat back then
I do remember needed a lot of SCSI cards in a single server to run all of this, but it did eventually run :)
Picture shows both a cable modem and ADSL modem
I even had a punchdown 66 block for multiple phone lines and ADSL, plus CAT5-E to the whole house
Yeah, I had to installing each and every cable one by one, wire by wire
This was almost pro-looking :)
Two servers, one file/master server (also home automation) and one router server, with UPS on top
that was the new router with 2 network cards, and somehow it still had SCSI because I didn't care more much for IDE ;)
A bit later, it got a bit more full :)
Years later, I was able to replace the 26 SCSI drive file server with a new one and 12 internal drives (SATA by then)
more drives on the outside (for backup) via eSATA
a few more SCSI cables (CAT-6)
See more images for First Linux Server Closet
and while the drive to Mount Hamilton
wasn't very spirited on the way up since we got a nice sheriff escort, the way
back down was more fun.![[picture]](/blogimg/224_Drive.jpg)
![[picture]](/blogimg/233_Drive.jpg)
![[picture]](/blogimg/300_Party.jpg)